Power Management; How To Switch To 'Sleep' Or 'Wake' Mode - Neopost IS-280 User Manual

2.4
Energy Star® Compliance
2
Your Mailing System is an Energy Star® qualified mailing system that automatically goes
into a low-power 'Sleep mode ' after a period of inactivity.
The mailing system automatically switches to 'Sleep mode' after 30 minutes of non-activity.
You can change this default setting in supervisor mode. You can also switch to a low-power
mode by pressing the Sleep/Wake button.
A very-low-power sleep mode called "Soft off mode " is also available. This mode should
only be used for long periods of non-use of the machine. In this mode, the machine takes
longer to wake up and the automatic postal updates cannot take place.
See also
• To change the low-power modes time-outs, see:
(User) on page 142 .

How to Switch to 'Sleep' or 'Wake' Mode

1.
Press
- A short press on the Sleep/On/Soft off mode button sets the machine to 'Sleep'
mode.
- A long press on the Sleep/On/Soft off mode button sets the machine to 'Soft off '.
The light located next to the key indicates:
- Green : The Mailing System is in Awake mode and ready for use.
- Amber (continuous) : The Mailing System is in Sleep mode (Low-power mode).
- Amber (blinking) : The Mailing System is in Soft off mode (Very-low-power
mode).
20

Power Management

to switch between 'Sleep' and 'Wake' modes.
To avoid weighing errors, make sure the Weighing Platform is
clear when waking up the machine. If the machine does not seem
to display a correct weight, see
How to Change the 'Sleep time-out'
Weighing Problems on page 201 .