Table of Contents
Advertisement
5
Connect the System to Mains
Power Supply and Power Up
Power Up
To start up the system:
5
1.
Connect the system to the mains power supply.
2.
Use the power switch to switch the system on. The power switch is located on the
back of the system.
3.
Press the on/off button next to the display.
4.
Select the language for the display.
5.
Press [No] if the software asks if you want to select the language e very time the system
is switched on.
Set Sales Organisation and Country Specific Details
Make sure the localisation menu has the correct settings:
1.
In the service menu, press [Total system], [System Settings], [Localisation].
2.
Make sure all settings in both localisation menus apply to the customer's situation.
14
You can severely damage the machine if it is connected to the
incorrect power supply. Before plugging in the machine, check if
the local voltage is the same as the voltage mentioned on the type
plate.
Advertisement
Table of Contents
