How To Set The Automatic Date Advance Function - Neopost IS-240 User Manual

How to Set the Automatic Date Advance Function

To select auto date-advance time and days logged as Supervisor (See
in as Supervisor
1. Either:
Press
Or
Select the path:
matic date advance
The Automatic date advance setting screen is displayed.
9
The second line of the screen indicates whether the function is active or not.
2. To change the function state, press [OK] or type 1 to access the Activate/Inactivate
screen and change the function state.
Select ON and press [OK] to enable the Auto Date-Advance function.
3. To set the changing time, select Set hours and press [OK] (or type 2 ).
4. Enter the Automatic Date-Advance time (00:00 hours is not allowed) and press [OK]
.
5. To set working days, select Set working days and press [OK] (or type 3 ).
6. Select or deselect each day by pressing [OK] and using the up/down arrows.
7.
Press
150
on page 128 ):
and type 3.3.4
Default user settings
to validate and exit.
Default imprint parameters
How to Log
Auto-