Table of Contents
Advertisement
Maintenance
Downloading Software Using RAS
Rev 1.00
Figure C-3
CD Contents with Firmware File
4.
Remove the CD from your PC and insert into the CD-ROM drive on your HRDV.
5.
Access the Download Software screen as follows: MENU
➤
System Utilities
Download Software.
Figure C-4
Select Download Type Screen
6.
Select CD.
Figure C-5
Figure C-5
Confirm Download Screen
7.
After the download is complete the HRDV recorder is rebooted.
From time to time a new version of the HRDV16/8 software may be available from
Honeywell. You may update your HRDV16/8 from a PC using either the Software Update
Utility (SUU) or Remote Access Software (RAS). SUU is a Windows-based application that
writes the data to the HRDV16/8 memory via an RS232 connection and updates the flash in
a one-load operation.
Caution
Powering down during the flash update requires a service card to
restore the unit to operational state. It may also require a service call.
Figure C-4
displays. Select OK.
186
➤
➤
System Setup
displays.
Document 900.0261
04/05
Advertisement
Table of Contents
