Table of Contents
Advertisement
Rev 1.00
Note
Each zone may have as many or as few squares included as you want.
Press button ...
Camera 5
5
Camera 16
16
Press and hold a Camera
button (1 to 4) AND press
Camera 16 button.
Note that the zone numbers turn red and a beep sounds when motion is detected as
defined by your Direction and Trigger Size field settings. This helps you make the
correct settings when you set up your zones. You may toggle on/off the beep while
setting up the zones by pressing PLAY on the front panel of the HRDV16/8.
7.
Select Accept to activate your changes and exit this screen.
8.
Repeat for all cameras as required.
To perform this action
Erases programmed zones
Performs full screen operation of the previously
activated button. For example, Camera 5 button
followed by Camera 16 button blanks the grid.
Fills the whole screen with the same zone assignment.
81
HRDV Reference Guide
Document 900.0261
04/05
Advertisement
Table of Contents
