Table of Contents
Advertisement
Rev 1.00
Figure 12-3
Typical Advanced Recording Schedule Setup
Monday to Friday, 8:00 a.m. to 5:00 p.m.
Closed after 5:00 p.m., weekends, and holidays
You assign normal and alternate weekly and hourly schedules here.
a.
Enter start and stop times to assign normal and alternate schedule times.
When entered, the display changes to show your settings. Green indicates the
normal schedule and red indicates the alternate schedule.
b.
When you are satisfied with your settings, select Accept to confirm the settings
and return to the Timelapse Recording screen.
4.
Set the normal recording rates. On the Timelapse Recording screen, select Normal
Setup to display the Normal Setup screen.
In the Normal Setup mode, you can program the HRDV16/8 to use a global record rate or
set a record rate for each camera. The global rate is common for timelapse VCR type
recording. Typically, 24 hour timelapse mode is equivalent to 5 fps and High Density
(real-time) timelapse recording is about 15 fps.
Disabling global record rate allows you to set the rate (fps) for each camera, in essence
allowing you to prioritize certain cameras to have more recorded images than others.
69
HRDV Reference Guide
Enable Motion Mode
if you want the system
to detect motion in
Timelapse mode
Document 900.0261
04/05
Advertisement
Table of Contents
