Controlling Ptz Camera Operation - Honeywell HDVR Reference Manual

Pan, Tilt, Zoom (PTZ)

Controlling PTZ Camera Operation

Field
PTZ
Preset/Pattern
1 to 100 (Preset)/
1 to 3 (Pattern)
Rev 1.00
To operate PTZ control from the HRDV front panel:
1. Select and display any one of your cameras that is PTZ capable.
2. The selected camera will appear full screen on the main monitor output. If the camera
has communicated with the HRDV and is a supported PTZ type, an asterisk will
appear next to the camera number on the video monitor.
3. Press FUNCTION + Camera 3 to display the PTZ control menu.
Enter manual PTZ control
Use the following table to navigate through the PTZ control menus, using the front panel
control buttons, just as you would in Program mode.
Description
Indicates this is a Pan, Tilt, Zoom control camera.
Preset. Use this option to set or recall (1 to 100) specific views.
Pattern. Use this option to store or execute (1 to 3) viewing patterns for the
camera.
Select Preset or Pattern camera view to store, set, recall, or execute.
156 Document 900.0261
04/05