Chapter 7 Cawdview Phone Software For Use; Chapter 8 Faq (Frequently Asked Questions) - Honeywell CADVR-1004-WD-M User Manual

Chapter 7 CAWDView
Please refer to the help center of the CAWDView .

Chapter 8 FAQ (Frequently Asked Questions)

01：Why the DVR did not run after connect the power supply?
①Please check the power switch turn on or off at the rear panel of DVR.
②Please check if the turn on DVR operation correct or not?
③If you select the adaptor +12V, 5A or above? (8ch 5A, 16ch 220V 200W)
phone software for use
49