Table of Contents
Advertisement
E-Mail Alert Program Installation
Rev 1.00
After you run the setup program and install the E-Mail Alert application, this application will
be added into the PC Start Menu. The next time the PC restarts, it will automatically start the
E-Mail Alert program. The user will see the E-Mail Alert splash screen for a couple of
seconds and then the program will minimize to the Windows status bar area located on the
lower-right corner.
The setup program can be found on the CD that came with the HRDV16/8 unit in the E-Mail
Alert 1.0 folder. You can also find the setup program on the Honeywell web site at
www.honeywellvideo.com.
To install the E-Mail Alert program:
1.
Insert your RAS CD into a Windows based PC that has a CD-ROM drive.
2.
When the RAS auto install window displays, click Cancel, and then Finish to exit.
3.
Using Windows Explorer, navigate to the E-Mail Alert folder, and then click Setup.exe.
4.
Follow the prompts as required.
To configure the E-Mail Alert program:
1.
Maximize the E-Mail Alert program by double-clicking the minimized E-Mail Alert icon
in the Windows status bar area
or double-click the Desktop E-Mail Alert icon.
The following screen displays.
168
Document 900.0261
04/05
Advertisement
Table of Contents
