Searching For Video Clips To Play Back; Figure 16-2 Search Screen - Honeywell HDVR Reference Manual

Searching for Video Clips to Play Back

Legend
✓
= Use this criteria
✘
= Do not use this criteria
Field
Begin, End
Alarm
Motion
Rev 1.00
To search for video clips:
1. Press PLAY.
2. When prompted, enter your user name and password, then press Enter. The Go To
Search screen displays. Select Search.
3. You can set the criteria used to generate a video clip list by searching all the
previously recorded video clips. You may select:
• All of the clips between a start date and time and an end date and time. If these
boxes are not checked, the date and time are ignored when the system creates a
list of clips to be played.
• Which types of events you want to include in your play list by enabling the check
boxes next to specific events.
• Timelapse clips
• Clips on an archive drive
Note When you place a check mark next to Check archive drive, the HRDV will
only search that drive.
To further refine your search, select the desired event(s) and individual or all cameras.
Figure 16-2 Search Screen
The following table describes the fields on the Search screen.
Description
Define a time range to search.
Search for video clips labeled Alarm event on Video Inputs 1 to 16.
Search for video clips labeled Motion event on Video Inputs 1 to 16.
107
HRDV Reference Guide
Use the control
buttons to increase or
decrease the value
Document 900.0261
04/05