Setting Alarm Events; Figure 8-2 Alarm Event Setup Screen - Honeywell HDVR Reference Manual

Setting Alarm Events

Field
Enable
Event Text
Record Rate
Rev 1.00
The HRDV16 has 16 hardwired alarm inputs on the back of the unit. The HRDV8 has 8. For
each input you must indicate how you want the system to handle alarm events. Alarm
events can be triggered by external alarm devices (for example, text insertion, motion
detection, a panic button).
For more information on how the system reacts to alarm events, see
page 58. For more information on activating a hardwired alarm from an HRDV to a panic
button in a remote location, see
Access the Alarm Event Setup screen as follows: MENU
Events. Figure 8-2 displays.
Figure 8-2 Alarm Event Setup Screen
The following table describes the fields on the Alarm Event Setup screen.
Description
Enable or disable the Alarm Event function for up to 16 alarm events (8 for the
HRDV8). Enable this field to change the settings on the screen.
Assign a title to each Alarm event. This text is used to title the video clip (see
Report Criteria on page 117) when reviewing events (see
page 120).
Specify the record rate, in fields per second (fps), to be recorded by each camera.
.1, .2, .5, 1 to 16 (10 is default), 20 to 60 in increments of five.
Note The total number of fps that can be recorded by all 16 cameras cannot add
up to more than 60 fps for NTSC or 50 fps for PAL. For the HRDV8, the total
fps that can be recorded by all 8 cameras cannot add up to more than 30
fps for NTSC or 25 fps for PAL.
Setting Alarm Events, page 37.
37
HRDV Reference Guide
Event Handling
➤ ➤
Event Recording Alarm
Event
Running a Report on
Document 900.0261
on
04/05