Table of Contents
Advertisement
Field (Cont'd)
Set
Displays on bottom
right-hand corner
of screen, when
you select Set
Store
Recall
Execute
Menu
Exit
Rev 1.00
Description
Set a new preset camera view:
Quick procedure:
1. Press the Camera icon to enter manual camera control.
2. Define a view using the control buttons.
3. Exit manual camera mode by pressing the camera icon.
4. Select Preset, then a number from 1 to 100, then select Set.
5. To view, select the preset number, then press Recall.
Store a new defined camera pattern.
Quick procedure:
1. Select Pattern mode.
2. Select a pattern from 1 to 3.
3. Select Store. You will enter manual PTZ mode and the message
Programming pattern displays on the monitor.
4. Move the camera through the desired patterns.
5. Press the Camera icon to return to the PTZ menu. This stores the pattern you
have just defined.
6. To play back, select the pattern number, then press Execute.
Go to the preset camera view, from 1 to 100.
Follow the pattern, from 1 to 3.
Enter manual control of PTZ camera or return to the PTZ camera menu.
To control a PTZ camera, move the camera using the arrow control buttons on the
HRDV front panel.
•
Zoom in. Turn outer jog wheel clockwise.
•
Zoom out. Turn outer jog wheel counterclockwise.
•
Turbo pan. Press and hold an arrow button + Enter at the same time.
Press to access the camera menu. In the camera menu, you can use:
•
The Camera 8 button as Enter.
•
The
and
control buttons to move through the menu options.
Exit this menu.
157
HRDV Reference Guide
Document 900.0261
04/05
Advertisement
Table of Contents
