Rev 1.00
4.
Ensure pre-event setup is disabled (MENU
Setup).
5.
Exit Program mode.
6.
Look for a dull red dot on the top right-hand corner of Monitor 1. This indicates that
timelapse recording is taking place and that motion is currently detected.
If you see a dull red dot with a slash, this indicates that camera(s) are ready to record
and are waiting for motion to be detected.
To set up motion sensitivity, see
➤
Event Recording
Chapter
13.
67
HRDV Reference Guide
➤
Pre-event
Document 900.0261
04/05