Timelapse Recording Setup
Rev 1.00
Timelapse video clips are stored in the timelapse disk drive partition. This chapter
describes how to record and store timelapse clips only.
It is possible to schedule your HRDV to store both timelapse clips and event clips. Events
(motion, text, or alarm) generate event files that are written to the event partition. To store
event clips (for example, motion or text) in the event disk drive partition, see
This chapter describes how to use the timelapse settings to:
•
Select the global record rate and compression setting for timelapse recording
•
Set the recording times for each day of the week
•
Assign settings for up to ten holidays
•
Set simple and advanced Timelapse mode
•
Enable motion detect operation for timelapse clips
Caution
If you use your HRDV16/8 as a combined timelapse/event recorder,
the event recording settings override the timelapse settings when an
event is detected. When the system detects an event, the event
recording settings are used instead. See
on page 83.
There are two timelapse modes available: simple and advanced. To select simple or
advanced timelapse mode, go to the User Preferences screen (MENU
➤
User Preferences).
Pre-Event Recording Setup
61
12
Chapter
13.
➤
System Setup
Select Simple or Advanced
Document 900.0261
04/05