Step 2. Configure The Video Inputs; Figure 20-2 Camera (Video) Setup Screen - Honeywell HDVR Reference Manual

Step 2. Configure the Video Inputs

Field Description
Camera Enable You must enable this box for each camera that is connected to the HRDV.
Note
Overlay Enable Enable this field to change the camera title text. Activate the box by pressing Enter, then edit
the camera title in the text entry screen. Titles can be up to 17 characters long.
Caution
Position Position of the title in the camera field of view. Options are:
Upper Left
Lower Left
Split Time/Title (for example, time at the top of the screen and the title at the bottom)
Split Title/Time
Single line top
Single line bottom
Text Port Indicates the Text Insertion port to which this camera receives and records text input.
Options are:
1 to 4, None
Rev 1.00
Use the Camera Setup screen to enable/disable camera inputs and specify how the
transaction text is displayed on each camera, including video termination. Each camera can
record the text input from any one text input port.
Access the Camera Setup screen as follows: MENU
Figure 20-2 displays.
Figure 20-2 Camera (Video) Setup Screen
The following table describes the fields on the Camera Setup screen.
Disable unused video inputs to prevent a video loss alarm from occurring.
The date and title must be enabled to appear on the recorded video.
➤
145
HRDV Reference Guide
➤
System Setup Video Inputs.
Select, then use the
control buttons (
) to choose a
camera input to
configure. Camera 1
corresponds to Video
input 1, and so on.
Document 900.0261
04/05