Archive Operation
Saving Video Clips to an Archive Drive
Rev 1.00
a.
Select the camera(s) to have archived (see
Note
A smaller number of cameras will lower the archiving time.
b.
Select Next and press Enter.
Figure 18-2
Archive Camera Selection
c.
Enter the amount of time to copy (maximum time cannot exceed clip length or 59
minutes, 55 seconds) and press Enter.
Note
If you are downloading a partial clip without using the Go To search function,
you can only download video within the current clip, even if you specify a time
period that spans several clip.
6.
You will be asked: Are you Sure? Select Yes and press Enter.
7.
An Archive Status window displays a progress box showing the percentages of data
transferred. Press OK when complete. Press any control button to cancel the archive
operation before completion.
To save video clips from the review list in a report:
1.
Enable this feature in the Disk Setup screen (see
2.
Set the Archive field to Disk or Tape (see
3.
Use the
and
control buttons to highlight the report clips you want to archive,
then press the Camera 1 button to select them or the Camera 2 button to select all
the clips.
Figure
Storage Setup
Figure
17-7).
132
18-2).
on page 47).
Document 900.0261
04/05