Load Default Settings; Events Settings - KGuard Security NS401 User Manual

Load Default Settings

Use this feature to restore the factory default settings of the DVR.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu
3
Click Load Default.
4
Check the check box of the settings that you want to restore.
« TIP »
• To restore all settings, click Select All.
• To deselect all checked boxes, click Clear.
• To cancel, click Cancel.
5
After all settings are complete, click Apply.
6
A warning message appears, click OK to confirm.
7
When data saving is complete, click OK.

4.8.2 Events Settings

The Events page allows you to define the type of events for the DVR to issue an alarm.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu
> ADVANCED.
> ADVANCED, select the Events tab.
Chapter 4: Using the DVR
DVR User's Manual
69