Preparation For Use; Attaching The Sheet Feed Tray And Stacker - Sekonic SR-1800 Operating Manual

SR-1800

Preparation for Use

Prepare the device for use by following the procedure below.
Reference: For information on unpacking the device, refer to " Unpacking the Device" (P.10).
Attaching the Sheet Feed Tray and Stacker
Attach the sheet feed tray and stacker to the main body unit as shown in the diagrams below.
(1) Attach the sheet feed tray to the side of the main body unit where the sheet is fed.
Insert the hooks (2) of the sheet feed tray into the corresponding holes on the main body
unit.
(2) Attach the stacker to the side of the main body unit where the sheet is discharged.
Hook the hooks (2) of the stacker into the corresponding holes on the main body unit.

Sheet feed tray Sheet feed tray
Stacker Stacker