B Setting Reading Side - Sekonic SR-2300 Manual

B
Data reading settings
B
Setting reading side
You can set the reading side when the optional double-sided reading unit is installed.
The reading side can be set to either "single side" or "double side."
When reading single-sided sheets, if you set the reading side to "single side," the back side
won't be read.
1.
MENU
Press the
2.
UP
Use the
and press the
3.
UP
Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the
5.
FEED/ENTER
Press the
(The flashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
-32-
Setting reading side
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select [Reading Side] setting,
FEED/ENTER
switch.
DOWN
and switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
Reading side
setting values
• Single Side
• Double Side