B Setting Reading Method - Sekonic SR-2300 Manual

B
Data reading settings
B
Setting reading method
Setting mark-reading method.
There are six kinds of reading methods: "Top-end timing control type," "Bottom-end timing control
type," "Direct under type," "FACOM," "Mark to mark type (without top-end margin reading)," and
"Mark to mark type (with top-end margin reading)."
When setting to "top-end timing control type" or "bottom-end timing control type," you need to set
a control multiple number.
1.
MENU
Press the
2.
UP
Use the
and press the
3.
UP
Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the
5.
FEED/ENTER
Press the
(The flashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
-28-
Setting reading method
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select [Reading Method] setting,
FEED/ENTER
switch.
DOWN
and switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
Reading method
setting values
• Control Fore
• Control Back
• Direct
• FACOM
• Mark to Mark
• Mark to Mark