Warnings - Sekonic SR-2300 Manual

2.

Warnings

(1) Components
Error
Un-connecting
back reading u
(2) Paper feeding
Error
Hopper empty
Double feed error
Left end skew error
Mark skew error
Error displays and countermeasures
Explanation
Back surface reading unit is not
installed.
Explanation
There is no paper in the hopper.
Two or more sheets were fed
simultaneously.
Paper was fed crooked.
Mark less than detection
level is detected in the
set area.
Solution
• Check if the back surface reading
unit is installed.
• Press the CLEAR switch
(or execute the clear error
command).
Solution
Press the CLEAR switch
(or execute the clear error
command).
Press the CLEAR switch
(or execute the clear error
command).
Press the CLEAR switch
(or execute the clear error
command).
Press the CLEAR switch
(or execute the clear error
command).
-55-