Interface Cables; Using The Usb Interface; Using The Ethernet Interface - Fuji Xerox DocuCentre-II 7000 User Manual

Interface Cables

When connecting the machine directly to a computer, use either the parallel interface
or USB interface. When connecting to a network, use the Ethernet interface.

Using the USB Interface

The USB interface supports USB 2.0.
This section describes the installation procedure for the USB interface.
1
Ensure that the machine is off.
2
Connect the USB interface cable to
the USB 2.0 interface connector on
the side of the machine.
3
Connect the other end of the USB
interface cable to a computer.
4
Switch on the machine.
5
Restart the computer.
For details of setting items, refer to "8 Printer Environment Settings" > "Installing When Using USB
Port" in the Administrator Guide.

Using the Ethernet Interface

The Ethernet interface supports the following 2 types.
100BASE-TX
10BASE-T
This section describes the installation procedure for the Ethernet interface.
1
Ensure that the machine is off.
2
Connect the network cable to the
Ethernet interface connector.
Note
3
Switch on the machine.
• Prepare a network cable
suitable for your network
connection. When changing
the network cable, consult our
customer engineers.

Interface Cables

2
35