Form Overlay (Making Copies To Overlay Documents); Delete Outside/Delete Inside (Deleting Outside Or Inside Of The Selected Area) - Fuji Xerox DocuCentre-II 7000 User Manual

Next Original
Select this when you have another document. This is on when using the [Combine
Original Sets] feature.
Cancel
The document data stored by [Combine Original Sets] is cleared and the copying is
cancelled.
Note
Start
Load the next document, and select [Start] to start scanning.
Note

Form Overlay (Making Copies to Overlay Documents)

This feature scans the first page of a document as a form image, and overprints it on
the copies of the subsequent pages.
Note
1
Select [Form Overlay].
2
Select [On].
Off
A form image in the memory is not overlaid.
On
A form image in the memory is overlaid.
Delete Outside/Delete Inside
(Deleting Outside or Inside of the Selected Area)
Specify an area to delete everything outside or inside of when copying. 1 area can be
specified.
1
Select [Delete Outside/Delete
Inside].
2
Select any item.
Off
Nothing is deleted.
Delete Outside
Deletes the outside of the selected area when copying.
Delete Inside
Deletes the inside of the selected area when copying.
• The same operation is performed if you press the <C> button or <Clear All> button on the
control panel.
• The same operation is performed if you press the <Start> button on the control panel.
• If the machine is set to detect Secure Watermark, this feature may not be used depending
on the type of a form image. For details, contact our Customer Support Center. For details
on Secure Watermark settings, refer to "6 System Settings" > "Common Settings" > "Secure
Watermark" in the Administrator Guide.
Job Assembly
3
103