Fuji Xerox DocuCentre-II 7000 User Manual page 48

2 Product Overview
Differences in the [Job Status] screen
Tab
-
Differences in the system settings feature
Tab
Common
Settings
2
Copy Mode
Settings
46
Feature changed/
Item
-
Feature changed/
Item
Machine Clock/ -
Timers
Screen/Button All Services
Settings
All Services -
Additional Features
Paper Tray Paper Tray Attributes
Settings
Paper Tray Attributes
on Setup Menu
Tray 5 (Bypass) Paper
Size Defaults
General Settings Features
Tab - Features
Allocation
Preset Buttons Paper Supply - Button
2 - 5
Reduce/Enlarge -
Button 3 - 5
Copy Defaults Reduce/Enlarge
Edge Erase
Stamp Position
location
- The [Job Report] button is displayed on the
screen that appears when selecting a job.
Prints a job status information report.
The name of the report output is [Job
Report].
location
The location is changed from [Connection
Interval] under [NTP Time Synchronization].
The name is changed from [Services] in [All
Services].
The name is changed from [Additional
Features] in [All Services].
The name is changed from [Paper Size/
Type].
The paper color can be set if you select
[Enabled] for [Paper Color] under
[Customize Paper Supply Screen].
The button name displayed on the [Setup
Menu] screen is [Paper Tray Attributes].
20 paper sizes are preset.
The name is changed from [Copy Tab].
5 features
No feature can be allocated.
7 features
Up to 3 features can be allocated.
10 features
Up to 6 features can be allocated.
Allows you to assign frequently used trays to
the 2nd to 5th Paper Tray buttons.
Allows you to assign frequently used
magnifications to the 3rd to 5th Reduce/
Enlarge buttons.
14 buttons are available for Reduce/Enlarge.
Allows to set edge erase values for top,
bottom, left, and right, individually.
Allows to specify [Side 1] and [Side 2].
Side 1
9 positions are available.
Side 2
Same as Side 1
Opposite to Side 1
Changes
Changes