Table of Contents
Advertisement
Original Orientation
In order to identify the top of the document, the orientation of the document must be
specified.
Refer to "Original Orientation" (P.125).
Reduce/Enlarge (Specifying a Scanning Ratio)
You can set the scanning ratio for the document to be scanned.
1
Select [Reduce/Enlarge].
2
Select the ratio, or specify the ratio.
Proportional %
Select a ratio from the preset ratios, or specify a value within the range from 25 to 400%
in 1% increments.
To specify a value, touch the window displaying a value, and then use the numeric
keypad or the [ ] and [ ] buttons.
Auto %
In [Output Size], select the output
size of the scanned document. The
machine automatically calculates
the scanning ratio based on the
selected output size and the original
document size.
Note
• Any margins generated by the [Auto %] setting become blank data.
Layout Adjustment
4
135
Advertisement
Table of Contents
