Table of Contents
Advertisement
Job Assembly
On the [Job Assembly] screen, you can configure features such as Build Job and
Sample Set. The following shows the reference section for each feature.
Build Job (Making Copies of Documents with Different Settings in a Single Operation)........ 99
Sample Set (Checking the Finished Output of the Copy) ........................................................ 101
Combine Original Sets (Adding Originals).............................................................................. 102
Form Overlay (Making Copies to Overlay Documents).......................................................... 103
Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected Area) .................... 103
1
On the [All Services] screen, select
[Copy].
2
Select the [Job Assembly] tab, and
then select a feature on the [Job
Assembly] screen.
Build Job (Making Copies of Documents with Different Settings in a
Single Operation)
This feature allows you to change and save settings individually for each document
page or stack and then to finally make copies of documents with different settings as
one job.
Note
1
Select [Build Job].
2
Select [On].
3
Select the desired print settings.
Note
Off
Build Job is not applied.
On
Build Job is applied. The feature buttons appear. Set any item if necessary.
For the features that can be set here, refer to "Copy Output (Outputting by Specifying Finishing)" (P.78).
Features that can be set in Build Job
Copy Output
For information on the feature, refer to "Copy Output (Outputting by Specifying Finishing)" (P.78).
Booklet Creation
For information on the feature, refer to "Booklet Creation (Creating a Booklet)" (P.80).
Covers
For information on the feature, refer to "Covers (Attaching a Cover to Copies)" (P.83).
• To copy on the tab paper when using [Covers], [Tab Margin Shift], [Separators], set [Output
Orientation] to [Face down].
• Select [
] to return to the
previous screen or [
] to
move to the next screen.
Job Assembly
3
99
Advertisement
Table of Contents
