Table of Contents
Advertisement
9 Glossary
Power Saver Feature
Print Page Buffer
Printable Area
RAM
Receive Buffer
Remote Terminal
Resolution
ROM
ROS
Scan
9
Screen
Select
Separator
SMTP
Start Reservation
Status Display Code
196
Term
A feature that switches the machine status to standby after a
period of inactivity.
The following power saver features can be set for the
machine.
Low Power Mode: The power to the fuser unit and motor is
Sleep Mode:
A location where print data is rendered.
The actual area on paper which can be printed.
Random Access Memory. It is a storage device (memory)
where information can be retrieved as well as stored.
A space used to temporarily store data sent from a client
computer.
A terminal with which you want to communicate. This is a
general term for terminals such as personal computers.
Represents a fineness of detail that can be distinguished on
an image. It is usually described in terms of the number of dots
per square inch (dpi), and a higher value indicates a higher
resolution (finely represented).
Read Only Memory. It is a storage device (memory) specific
for the retrieval of information.
Raster Output Scanner. It is a device for writing image signals
to a drum (light sensitive). A ROS is often referred to as a laser
beam scanner.
Sensing or reading a paper document and converting the
optical image of the document to an electronic image.
The machine offers two scanning devices: document glass
and document feeder.
The screen that is displayed on the touch screen. It displays
messages and feature buttons.
In this document, "Select" refers to highlighting a feature
selection by touching the feature button on the touch screen
with your finger.
A blank, colored, or copied paper inserted between sections or
topics in a set of documents.
Simple Mail Transfer Protocol.
A communications protocol (an agreement governing the way
data is transmitted) commonly used for sending and receiving
e-mail.
In this guide, this refers to loading a document, selecting
features, and pressing the <Start> button immediately after
switching the power on. Once the machine is warmed up and
ready, it will automatically start copying.
A code that indicates the machine status. When an error
occurs on the machine, a status display code appears on the
touch screen.
Description
lowered when the machine is left unused
for a fixed amount of time. The touch
screen goes out, and the <Power Saver>
button lights.
Almost all of the device is in standby mode,
the machine consumes the least power.
Advertisement
Table of Contents
