Table of Contents
Advertisement
2 Product Overview
Power Saver Mode
The machine is installed with a Power Saver feature that will automatically cut off the
electricity to the machine if no copy or print data is received for a certain duration.
The Power Saver feature has two modes: [Low Power mode] and [Sleep mode].
The default time interval for switching to the [Low Power mode] and [Sleep mode] is
one minute each. If the machine is left unused for one minute, therefore the machine
will enter the [Sleep mode].
Low Power mode
In this mode, the power to the control panel and fuser unit is lowered to save power.
The touch screen goes out, and the <Power Saver> button on the control panel lights.
To use the machine, press the <Power Saver> button. The <Power Saver> button goes
out to indicate that the Power Saver feature is cancelled.
2
Sleep Mode
In this mode, the power is lowered more than in the Low Power mode.
The touch screen goes out, and the <Power Saver> button on the control panel lights.
To use the machine, press the <Power Saver> button. The <Power Saver> button goes
out to indicate that the Power Saver feature is cancelled.
Changing the Power Saver Mode Change Interval
The procedure for setting the Power Saver feature is as follows.
To activate the Power Saver feature, set both the times until the activation of Low
Power Mode and Sleep Mode.
Note
1
Press the <Log In/Out> button.
2
Enter the User ID with the numeric
keypad or a keyboard displayed by
pressing [Keyboard], and select
[Confirm].
Note
32
• The time to activation of Low Power Mode and Sleep Mode can each be specified in 1
minute increments, from 1 to 240 minutes.
• The default User ID is
"11111". When using the
Authentication feature, a
passcode is required. The
default passcode is "x-admin".
1
2
3
4
5
6
7
8
9
0
#
C
<Log In/Out>
button
Advertisement
Table of Contents
