Multiple Copies (Using The Adf); Memory Full Message - Brother MFC9100C Service Manual

Multiple Copies (Using the ADF)

You can make multiple copies using the document feeder. When you use
or
Mono Copy Color Copy
(all copies of page 1, then all copies of page 2, etc.) or SORTED
(collated). (See Memory Full Message, below.)
1
Place the document in the feeder.
2
Press
Mono Copy
3
Using the dial pad, enter the number of copies you want (up to 99)
and press .
Set
For example, press
4
Press or
and press .
Set
5
Press
Mono Copy
(You must press the same key you pressed in Step 2.)
If you get a MEMORY FULL message, you may be able to make multiple
copies if you first print incoming faxes in memory and restore the memory
to 100%.

Memory Full Message

If the memory becomes full while
you're making copies, the screen
displays a message:
If you were scanning the first page of your document, press
then make a single copy. If you were scanning subsequent page(s), press
to print the scanned pages—OR—Press
Copy
You'll need to clear some fax messages before you can continue.
To gain extra memory, you can turn off Fax Storage (see page 8-2)
—OR—print fax messages in memory (see page 5-4).
10 - 2 C O P Y O P E R A T I O N S
, you can choose whether the copies will be STACKED
or .
Color Copy
, for 38 copies.
3 8
to select SORT (or STACK)
or again.
Color Copy
MULTI COPY:STACK
ONLINE
MULTI COPY:SORT
ONLINE
MEMORY FULL
ONLINE
COPY TO COPY
ONLINE
STOP TO ABORT
ONLINE
Stop
to cancel.
Stop
P.01
to cancel,