Brother MFC9100C Service Manual page 121

Adjustment procedure
(1) Place the facsimile equipment on a flat, firm surface.
(2) Secure the carriage rail and carriage ASSY to the main frame.
(3) Move the carriage to the left end of its travel.
NOTE: If the carriage is locked in the home position, rotate the paper feed gear L at the left
side of the main chassis to retract the carriage lock.
(4) At the right end of the paper ejection roller shaft, check that the pawl is in a horizontal position
as illustrated on the next page. If not horizontal, turn the paper ejection roller to make the
pawl horizontal.
(5) Put the reference jig on the paper ejection roller shaft and paper feed roller shaft (in the
direction of arrow
•
). Then push it to the rear (arrow
IV - 80
‚
).