Storing Speed Dial Numbers; Changing One Touch And Speed Dial Numbers - Brother MFC9100C Service Manual

Storing Speed Dial Numbers

You can store Speed Dial numbers, so you can dial by pressing only three
keys (and
Start
page 7-4.)
1
Press ,
Function
2
Use the dial pad to enter a two-digit location
(00–99) and press
3
Enter the number (up to 20 digits) and
press .
Set
4
Use the dial pad to enter the name
(up to 15 characters) and press
You can use the chart on page 4-2 to help
you enter letters—OR—Press
the number without a name.
5
Press or
FAX
TEL
FAX/TEL
6
Return to Step 2 to store another Speed Dial number—OR—Press
exit.
Even if you lose electrical power, numbers stored in memory will not be
lost.

Changing One Touch and Speed Dial Numbers

If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current name stored
there, then prompts you to either
1
Press to change the number, or press
1
2
Enter a new number and press
If you want to erase the number, press
left of the digits.
If you want to change a digit, use
the digit you want to change, then type over it.
3
Follow the directions from Step 4 for Storing One Touch Numbers or
Storing Speed Dial Numbers.
7 - 2 A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
). There are 100 Speed Dial locations. (See Speed Dialing,
, , .
1 5 2
.
Set
Set
to select the type of number and press
a fax number
a telephone (voice) number
both fax and telephone number
1.CHANGE 2.EXIT
Set
SPEED-DIAL? #
#05:
NAME:
.
Set
to store
to exit without changing it.
2
.
when the cursor is to the
Clear
or to position the cursor under
:
Set
to
Stop