Brother MFC9100C Service Manual page 91

n n
Reassembling Notes
• When reinstalling the main chassis onto the paper feed frame, be sure to:
- route the carriage motor harness along the top of the main chassis and through cutout "X"
provided in the main chassis, and then tape it near the carriage motor as shown on pages
IV-49 and IV-64,
- route the paper width/registration sensor harness and paper ejection/cassette sensor
harness through cable guide "Y" provided on the upper paper chute (see page IV-70) and
cutout "X" (see page IV-49), and
- route the paper feed motor harness and VC harness through the cable clamp attached to the
NCU bracket (see page IV-36).
IV - 50