Initial Setup; Getting Started; Setting Dialing Mode (Tone/Pulse); Setting Date And Time - Brother MFC9100C Service Manual

4
4

Initial Setup

Getting Started

Setting Dialing Mode (Tone/Pulse)

Your MFC comes set to accommodate tone (multi-frequency) dialing
service. If you have pulse (rotary) dialing service, you need to change the
dialing mode.
1
Press ,
Function
2
Use or to select TONE or PULSE
dialing mode and press
3
Press to exit.
Stop

Setting Date and Time

Your MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time.
All other settings remain unaffected.
1
Press ,
Function
2
Enter the last two digits of the year and
press .
Set
For example, enter 00 for the year 2000.
3
Enter two digits for the month and
press .
Set
For example, enter 09 for September,
or 10 for October.
4
Enter two digits for the day and
press .
Set
For example, 06
5
Enter the time in 24-hour format and
press .
Set
For example, enter 15:25 for 3:25 PM.
6
Press .
Stop
The screen now displays the date and time you set, and displays it
whenever the MFC is standing by.
, , .
1 1 1
.
Set
, , .
1 1 2
DIALING:TONE?
DIALING:PULSE?
ENTER YEAR:XX
ENTER MONTH:XX
ENTER DAY:XX
ENTER TIME:XX:XX
I N I T I A L S E T U P 4 - 1