Brother MFC9100C Service Manual page 164

Selector
No.
1 Not used.
2 Ringer OFF setting
3 Not used.
Detection of distinctive ringing
4
pattern
5
| Not used.
8
NOTE: Selector 4 is applicable only to the U.S.A. versions
Selector 2: Ringer OFF setting
l l
This selector determines whether or not the ringer can be set to OFF.
Selector 4: Detection of distinctive ringing pattern
l l
If this selector is set to "1," the equipment detects only the number of rings; if it is set to "0," the
equipment detects the number of rings and the ringing time length to compare the detected ringing
pattern with the registered distinctive one.
WSW27
(Function setting 5)
Function
V - 37
Setting and Specifications
0: Yes 1:
0: No 1:
No
Yes