If You Don't Have A Cd-Rom Drive; Computer Requirements - Brother MFC9100C Service Manual

If You Don't Have a CD-ROM Drive

All software is supplied on CD-ROM. If you need a Floppy Diskette
version you must tell the Brother Representative the version of Windows
that you are using and your MFC model number. To order,
call Brother at 1-888-879-3232 (USA), 1-800-668-2768
(from within Canada) or 1-514-685-6464 (from within Montreal).
Only Multi-Function Link
Disks, item numbers DSK9131 (for Windows
®
Windows 95/98). If you are using Windows NT
Version 4.0, the software is not available on Floppy Diskette.

Computer Requirements

The following are the minimum computer requirements you need to set up
and operate the MFC as a printer. Use only a shielded interface cable that
is IEEE-1284 compliant, and that is less than 6.5 feet (2 meters) long.
CPU
RAM
Hard Disk Drive
Operating System Windows
12 - 2 S E T T I N G U P T H E M F C A N D C O M P U T E R
®
Pro and PaperPort
Pentium 75 or Higher
8MB or greater for Windows
8MB or greater for Windows
(16MB recommended)
16MB or greater for Windows
Workstation Version 4.0 (32MB recommended)
50MB CD-ROM 1
150MB CD-ROM 1 & 2
®
3.1x, 95/98 or NT
DOS environment compatible with your Windows
version
®
are available on Floppy
®
3.1x) and DSK9195 (for
®
Workstation
®
3.1x
®
95
®
98 and Windows NT
®
Workstation Version 4.0,
®
®
®