Auto Switch; Color Video Printing - Brother MFC9100C Service Manual

Auto Switch

Whenever you connect video equipment to the MFC and turn the video
signal on, the MFC
video printing mode
and the screen displays
As soon as you turn off the video equipment or disconnect it, the MFC
returns to normal copy mode for
The Auto Switch will not work if you have too much in memory.

Color Video Printing

1
With no documents in the feeder, plug the cable from your video camera's
Video Out jack into the MFC's RCA pin jack.
2
Play the video. When the MFC begins receiving the video signals, the
MFC screen displays
3
Press
Color Copy
4
Using the dial pad, enter the number of copies you want (up to 99).
5
Press
Color Copy
If the MFC is not receiving video signals,
if a document is in the feeder, the MFC will print a color copy of it.
11 - 2 W A L K - U P V I D E O P R I N T I N G
and
Paper Type
VIDEO:PRESS COPY
CAPTURE READY
VIDEO:PRESS COPY
CAPTURE READY
when you see the picture you want to capture and print.
to begin printing.
keys automatically switch to
Copy Quality
and
Paper Type Copy Quality
will not work. However,
Color Copy
.