Windows Printing; Printer Emulation; Using The Maintenance Utility Program For Printing From Dos; Installing The Brother Mfc 9100 Series Dos Tools - Brother MFC9100C Service Manual

14
14
Windows

Printer Emulation

If you are printing from the Windows
the GDI Brother MFC 9100 Series printer driver. Other emulations may
reduce performance. If you need to print from DOS, the MFC 9100C will
emulate EPSON LQ-510, LQ-850 and LQ-2550.
Using the Maintenance Utility Program for
Printing from DOS
Before printing from DOS applications, you must use this DOS utility and
select the paper size. You can select the following in this program.
Maintenance
Cleaning
Black
Yellow
Cyan
Magenta

Installing the Brother MFC 9100 Series DOS Tools

Use these tools only in the DOS environment. When you print in DOS
mode, select an EPSON ESC/P (LQ-510, LQ-850, LQ-2550) compatible
emulation driver in your application.
1
Insert the supplied "CD-ROM 1" into your CD-ROM drive.
2
Type CD x:DOS
Substitute the drive letter of your CD-ROM drive for "x".
3
Type DOSETUP, then press Enter. The main screen appears on your
computer.
4
Make your selection from the list above.
Before printing, you must set the paper size in this utility and in your
DOS application.
® Printing
®
environment, it is best to choose
Data 1
Quality
Page Length
Character Set
Auto LF
Text Print Direction
Condensed
W I N D O W S
Data 2
Character Pitch
LF Pitch
Auto CR
Zero Font
Paper Size
Black Emphasis
Code Page
®
P R I N T I N G 14 - 1