1.25 Arm 12.3 ASSY and
Paper Feed Roller
(1) Make sure that the carriage is placed in the home position.
(2) Remove the retaining ring E4 from the arm 12.3 ASSY and take it off from the main chassis.
(3) Remove the retaining ring E8 from the left end of the paper feed roller shaft inside the main
chassis.
(4) Take out the paper feed roller in the direction of the arrow.
Once removed, the components given in this
Caution
subsection require the purge unit adjuster for
reassembly. Refer to Section 3,
"ADJUSTMENT" in this chapter.
IV - 58