Brother MFC9100C Service Manual page 379

If you are using Windows
4.0, the Software Installation program appears automatically when you
insert the Brother CD-ROM.
For Windows
can also click on Start at the Desktop, select Run and then enter
x:\SETUP.EXE.
If you are using Windows NT
will appear on the screen: You are running Windows NT
Brother MFL Pro does not support this version of Windows NT
MUST UPGRADE TO WINDOWS NT 4.0 AND REINSTALL MFL Pro!!
If you are using Windows NT
as the Administrator, an error message appears explaining the problem.
A window will appear listing the options:
For each application you install, click on its name in the Software
Installation window and follow the instructions on the screen. The last
step will be to restart Windows
window again to install the next application.
3
Click on "Install Multi-Function Link
prompts on the screen.
After you install the Multi-Function Link
The MFC Remote Setup dialog box will be displayed on your PC screen.
MFC Remote Setup allows you to quickly set up your MFC by taking
advantage of the ease and speed of programming on your PC. When you
access this application, the settings on the MFC will be displayed on your
PC so you can change them as needed and then download them to the
MFC.
12 - 6 S E T T I N G U P T H E M F C A N D C O M P U T E R
®
95/98 or Windows NT
®
95/98 and Windows NT
®
3.51 or earlier, the following error message
®
Workstation 4.0 and you are not logged-in
®
and access the Software Installation
®
Workstation Version
®
Workstation Version 4.0, you
®
®
Pro Software" and follow the
®
Software, and restart your PC.
3.51 or earlier.
®
. YOU