Firmware Loader - Extron electronics DMP 128 User Manual

Firmware Loader

Extron provides a firmware loader utility that, when installed, allows the firmware
of the DSP Configurator program to be updated or replaced.
To install upgrade the DMP 128 firmware:
•
•
To access the firmware loader:
1.
2.
3.
4.
5.
6.
The firmware upload is complete.
Download, then install the Firmware Loader utility
from www.extron.com.
Download the desired firmware file from the
Extron website, (see Firmware Upgrade Page
on page 161).
From the DSP Configurator toolbar, select
Tools > Firmware Loader.
The dialog box opens. Type the
Add Device
IP address of the DMP 128 in the
field, then click OK.
IP Address
notE: If the IP has not been changed, the
default IP address is: 192.168.254.254
The screen opens.
Firmware Loader
From the toolbar, select File>Open.
Locate the downloaded firmware file and click it.
Click Begin on the main Firmware Loader dialog. The total
progress bar tracks the loading progress.
When the upload is finished, exit the program by selecting
File>Exit.
Hostname or
DMP 128 • Reference Information 168