Adding A Building Block - Extron electronics DMP 128 User Manual

adding a Building Block

Custom building blocks are created using a signal path configured for a specific device.
For example, when a new mic is connected to Input #3, the signal path might be tailored
specifically for that mic.
In this example a gain setting is applied and a noise gate inserted. They are then stored as
a custom building block.
To create a building block for the new microphone:
1. Click inside the input number box (see above).
2. In the dialog box that opens, select the Add Block icon in the upper left.
The
Add a Building Block
3. In the dialog box, type a name for the new device in the
4. Select a folder for the new device (see above).
5. Click Add.
dialog box opens.
DMP 128 • Software Control
field.
Name:
107