Hybrid Spot Control Panel; Turning On The Welder - Pro Spot PHS-101 Instruction Manual

4.0

4.2.3 Hybrid Spot Control Panel

Batt1
Batt2
Batt3
Batt4
Turn Welder On/Off
To Turn On : Press Weld
READY
Control Button
To Turn Off : Unplug
Welder Press + Hold
Weld Control Button

4.3 TURNING ON THE WELDER

To turn on the unit, press the weld control knob on the front panel (do not hold). The welder will run a
short self diagnostic then display the HOME screen, when shows the weld time, weld power, and cooling
status on the LCD. When the LED next to the Weld Control Button lights up green, the unit is ready to weld.
IMPORTANT! Make sure to read the instruction manual before operating the welder. Only trained
personnel should use this welder.
IMPORTANT! Assurez-vous de lire le Mode d'Emploi avant d'opérer le soudeur. Seul le personnel
quali é devrait utiliser ce soudeur.
OPERATION
12.40V 1.5A
12.40V 1.5A
12.40V 1.5A
12.40V 1.5A
All Info Copyright © Pro Spot International Inc. 15