Pro Pull Dent Pulling (Optional); Selecting Pro Pull Weld Mode; Pro Pull Component Diagram - Pro Spot PHS-101 Instruction Manual

6.0

6.9 PRO PULL DENT PULLING (Optional)

6.9.1 Selecting Pro Pull Weld Mode

6.9.2 Pro Pull Component Diagram

Pro Pull comes with three different
Blocking Plates with Quick-Connect design.
Block window size:
2.5"(63mm) x 1.5"(38mm)
PP-10-04
Block window size:
1.75"(44mm) x 1"(25mm)
PP-10-03
Block window size:
0.75" (19mm) dia.
PP-10-01
SINGLE-SIDED WELDING
Pro pull is a patented, innovative tool for fast and accurate dent pulling. It features
paintless dent removal functionality (see sec. 6.3.5 "Paintless Dent Pulling with
Pro Pull").
Make sure the ground plate is clamped rmly in place on the inside of a
clean metal surface as near as possible to the wld location
NOTE: Do not attach the ground to the metal you're about ot weld on.
When performing other weld tasks such as dent pulling, etc., the ground
attachment location becomes less critical.
Assurez-vous que la plaque de terre est serrè fermement en place à
l'intèrieur d'une surface propre de mètal le plus près que possible au ieu
de soudure.
NOTE: Ne xez pas le terre et le mètal que vous êtes sur le point de soudre.
Lors de l'exècution d'autres tâches comme la soudure dent de traction, etc,
le terre du lieu de saisie devient moins critique.
Large openings for
great visual control
of the pulling area.
All Info Copyright © Pro Spot International Inc.
Retrofit point for different end adapters.
Available for most weld guns.
(not included) See prospot.com for more
information.
CLT-55
Electrode
N-38
Nut
CLP-75
Removable weld shaft.
The weld current is
transferred through the shaft
and NO CABLE is required
to transfer the current
37