Pro Pull Assembly; Dent Pulling With Pro Pull; Paintless Dent Pulling With Pro Pull - Pro Spot PHS-101 Instruction Manual

6.0

6.9.3 Pro Pull Assembly

6.9.4 Dent Pulling with Pro Pull

1
Aim, position & fire!

6.9.5 Paintless Dent Pulling With Pro Pull

38
SINGLE-SIDED WELDING
A
F
1. Attach the Weld Gun (D) to Weld Shaft (C). Secure Lock Bolt (G).
2. Slide weld shaft and gun to standard distance (E).
3. Attach desired block place (A).
4. Position the weld tip in the bottom of the dent, weld, then pull the handle (F) to
initiate the pulling action. Use the shortest weld TIME possible to prevent extensive
weld marks.
2
Glue Adapter for Paintless
Dent Removal
All Info Copyright © Pro Spot International Inc.
C
D
approx.
0.7"(17mm)
Pull dent with Auto
Blocking.
E
3
Twist gun to release tip.