Battery Installation - Pro Spot PHS-101 Instruction Manual

3.0

3.4 BATTERY INSTALLATION

Preferred
Recommended Batteries - Centennial Commercial
Other
Recommended Batteries - Deka
When you rst receive your hybrid battery spot welder you will need to purchase 4 - Group 31 batteries
at >=1000A that have pole style car battery terminals. Remove the 7 screws on both side panels and
then remove the panels.
Insert batteries from the left
side, be sure to check the
labels (circled in the image)
and set the battery poles
facing the correct direction:
Negative on RIGHT, Positive
on LEFT.
INSTALLATION
C-31-10AP CCA1100
31P, P# - 1231PMF, CCA1000, RES 185, REF 1190
The rear lower battery has to
be installed from the opening
in the back of the welder.
All Info Copyright © Pro Spot International Inc.
Place the leads (red on positive and
black on negative) on the battery
terminals and tighten with a 1/2"
socket. Do not over tighten.
11