X-Adapter (Optional); Attaching The X-Adapter - Pro Spot PHS-101 Instruction Manual

5.0

5.7 X-ADAPTER (optional)

5.7.1 Attaching the X-Adapter

1
Loosen the handle and pull
out C-arm...
4
C
B
D
Insert the Tapered Electrode (B)
into the Shaft (C). Apply air
(carefully) to put pressure on the
electrodes so that Tapered
Electrode seats firmly in the shaft
before tightening the Collar (D)
set screw.
DOUBLE-SIDED WELDING
C-TYPE GUN
The advantage of the C-Type Spot Gun is that when making vertical pinch welds
on quarter panels, rocker panels, door pillars, etc., the spot gun is positioned
perpendicular to the work area. Easy to reach! Easy to use!
X-TYPE GUN
The X-type design is used on certain applications where the C-type can't reach.
90% of all welding needs can be done with the C-type but for some radiator
radiator support and truck bed pinch welds, the X-Adapter works better. This new
invention makes it possible to weld where you never could before!
2
Follow instructions in Sec. 5.4
to remove piston electrode
5
Tighten the Collar (D) set screw.
IMPORTANT! Do not tighten the Collar before the inserting Tapered
Electrode into the shaft. The collar is designed to prevent the Tapered
Electrode from falling out of the Shaft when the gun is fully opened.
IMPORTANT! Ne serrez pas le collier avant de glisser l' Électrode
Rétreci dans le tube. Le collier est conçu pour empêcher l' Électrode
Rétreci de tomber du tube quand le pistolet est completement ouvert.
All Info Copyright © Pro Spot International Inc.
3
Insert the X-Adapter onto the
gun.Tighten handle (A).
D
A
29