5.0
5.5 WELDING ELECTRODE MAINTENANCE
To maintain structurally-sound welds it is important to keep your welding electrodes clear from build-up.
It is also important to maintain a 6mm weld nugget diameter. Clean electrodes with a le and
periodically replace welding caps as explained in Secion 5.4 "Removing Welding Electrodes".
Fig. 1
5.6 WHEEL HOUSE ARM
The wheel house adapter allows access to hard to reach areas such as the wheel house.
PS-1101-CM:
60mm Electrode Shank
28
DOUBLE-SIDED WELDING
Also Available: Pro Spot PLT-50/A Pneumatic Low Pro le Dresser sharpens your
dull tips without having to remove the arm (Fig. 1)
WARNING! The electrodes may be hot. Use caution when handling them.
ATTENTION! Les électrodes peuvent être chauds. Soyez prudent lors de
leur manipulation.
PS-52-5/8:
Wheel House Arm
All Info Copyright © Pro Spot International Inc.
PS-1133-5/8:
Electrode