Checking The Configuration; Configuring Vty User Interface - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

4.2.6 Checking the Configuration

After configuring the console user interface, you can view information about the user interface,
physical attributes and configurations of the user interface, local user list, and online users.
Prerequisite
The configurations of the user management function are complete.
Procedure
l
l
l
----End
Example
Run the display users command, and you can view information about the current user interface.
<Huawei> display users
User-Intf
0
Username : Unspecified
Run the display user-interface console ui-number1 [ summary ] command, and you can view
the physical attributes and configurations of the user interface.
<Huawei> display user-interface console 0
Idx
0
+
F
Idx
Type : Type and relative index of UIs.
Privi: The privilege of UIs.
ActualPrivi: The actual privilege of user-interface.
Auth : The authentication mode of UIs.
Int
Run the display local-user command, and you can view the local user list.
<Huawei> display local-user
----------------------------------------------------------------------------
User-name
----------------------------------------------------------------------------
admin
ftp
guest
----------------------------------------------------------------------------
Total 3 user(s)

4.3 Configuring VTY User Interface

If you need to log in to the router for local or remote maintenance by using Telnet or SSH, you
can configure the corresponding VTY user interface as needed.
Issue 02 (2011-10-15)
Run the display users [ all ] command to check information about the user interface.
Run the display user-interface console ui-number1 [ summary ] command to check
physical attributes and configurations of the user interface.
Run the display local-user command to check the local user list.
Delay Type
CON 0 00:00:44
Type Tx/Rx
CON 0 9600
: Current UI is active.
: Current UI is active and work in async mode.
: Absolute index of UIs.
A: Authenticate use AAA.
N: Current UI need not authentication.
P: Authenticate use current UI's password.
: The physical location of UIs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Network Address
Modem Privi ActualPrivi Auth
- 3 -
State AuthMask
A H
A F
A A
4 Configuring User Interface
AuthenStatus AuthorcmdFlag
pass
Int
N -
AdminLevel
-
-
15
no
38