Table of Contents
Advertisement
1B1-24 M162 ENGINE MECHANICAL
Removal and Installation Procedure
1. Unscrew the upper nut(1) on engine mounting and remove
the engine.
Installation Notice
Tightening Torque
2. Unscrew the lower nut(3) and remove the hydraulic engine
mounting insulator.
Installation Notice
Tightening Torque
Notice
If the insulator is spotted with oil, replace the hydraulic
insulator assembly.
3. Installation should follow the removal procedure in the
reverse order.
62 - 93 Nm
28 - 47 Nm
1 Upper Nut
2 Hydraulic Installor ................. 62-93 Nm
3 Lower Nut ............................. 28-47 Nm
Advertisement
Chapters
Table of Contents
