Daewoo MUSSO Service Manual page 151

1B1-76 M162 ENGINE MECHANICAL
Tools Required
000 589 58 43 00 Chain Assembly
103 589 01 63 00 Rivet Set
001 589 72 21 00 Torque Wrench
Replacement Procedure
1. Position the No.1 cylinder to TDC (OT).
2. Insert the f 4mm pin to the intake and exhaust camshaft
flange not to rotate camshaft.
3. Remove the chain tensioner.
4. Mount the wedges to both sides of the camshaft sprocket
as shown in the figure.
5. Cover the chain housing with a clean cloth, and grind off
the timing chain pin from the intake camshaft sprocket with
the grinder.